...don't rush me

First off, I am excited to announce that the other hive took to their queen. Queen Penelope is right at home and laying lots of new baby workers!

Queen Cassandra is taking her sweet time with laying eggs. Last week when inspecting her hive, I noticed the same roaring sound that I found in my second hive when the queen was gone. There were no fresh eggs and only capped drone cells. Bad news. I was crushed, and immediately began what I can only call freaking out. I called around to find a replacement queen, but everyone was sold out! What to do?!? Eventually, I was able to get the supplier on the phone. He calmly walked me through what I saw and how I was inspecting the bees. He also asked if the bees were still collecting pollen. They were. He said that the bees would have stopped collecting pollen if she were gone. To discover Cassandra's existence, I took a frame of fresh eggs out of Queen Penelope's hive and placed it in Queen Cassandra's hive. The bees will supersede the queen if she is hurt or missing with these new eggs.

Transferring that frame of eggs was so stressful. I looked and looked at that frame to ensure that Queen Penelope was not on it. She was just beginning to be successful, and I dreaded the fact that I was doing something that risked hurting or losing her. I smoked the frame and brushed the bees back into the hive to clear the frame of bees. I replaced the frame with a new one and took the frame with eggs to Queen Cassandra's hive.

I went into Queen Cassandra's hive today to check for queen cells or new eggs. I didn't see either or those things. The bees had capped some of the brood as workers, but there was no evidence of trying to replace the queen. As I continued through the hive, I didn't find any more brood, but I did find the elusive Queen Cassandra. So she is alive and well, but in no rush to make my life easier.

My next step is to check back for eggs or queen cells in the next few days. Below are some photos of Queen Penelope and Queen Cassandra.

...off with her head

About two weeks ago, I checked in on the queens to ensure they had been released. One Queen, Cassandra, had been properly released. The other queen was still in her cage and all of her workers had died. The sugar had not been eaten through and the dead worker bees were blocking the exit. I decided to directly release her into the hive. The bees were not clinging to her cage usually indicating that they have accepted her scent.

A week later, I went back into the hives to check for a laying queen in both hives. Queen Cassandra had been busy. There were eggs and larva filling a full frame. The other hive had no evidence of a laying queen. Not sure what happened to her, but it probably had to do with being directly released

On Tuesday, I visited the bee store. I bought a new queen and started the 45 minute trek home. By the time I had driven 30 minutes, I noticed that there was no movement in the queen cage. Upon closer inspection, all the workers were dead. The queen was alive, but I wasn't about to risk putting a queen with no workers into my hive. Back to the bee store I went. They were great and replaced the queen.

This queen and her workers made it home safe and sound. The really interesting thing about a queenless hive is the sound they make when you open the box. It is a loud roar for lack of a better term. When I placed the new queen into the middle frame, the bees moved quickly to cover her cage and the roar ceased. This is by far the coolest thing I have seen happen in a bee hive. It looked like a wave of bees just rushing to greet the new queen. I will be sure to video it if I ever have to replace a queen again.

I will be back in the hive next Monday to check on progress. Of course, I will let you all know. Below is a photo of the dead workers. You can see that they are all piled up at the bottom blocking the exit.

...welcome home!

The bees were welcomed into their new homes over the weekend. I was a little worried about the cold and dreary weather, but the sun came out and the temperature rose slightly so I went ahead and put the bees into the hives.

Getting started!

First, I sprayed the bees down with sugar water. Because it was so cold outside, I sprayed them pretty lightly. They needed about 4 hours to clean themselves before the temps dropped below 50 degrees.

I removed 2 frames to place the queen and dump the bees into.

Next, I removed the queen cage and placed it between the 2 middle frames. I had arranged the frames with comb from last year. I put 2 frames full of honey in the middle for the bees to eat. On either side of the honey frames, I placed 2 frames of empty comb/pollen for the queen to lay brood. Outside those frames, I placed a frame of honey and on the very outside, I placed half built comb and empty foundation. The bees produce wax after 15 days and need a place to put the wax so there needed to be empty foundation for them to build.

I tried a new technique to hold the queen cage in place.  A push-pin.  It worked great!

The queen is in a cage with several worker bees. There is a small removable cork that leads to a candy that the bees will eat through to release the queen. This serves as a time release for the bees to get acquainted to the queen's pheromones before she is released into the hive.

After placing the queen, I dumped the worker bees from their shipping container into the hive. I quickly covered them.

At this point, it is still too cold to feed the bees sugar water. They will feed off of the honey in the existing comb until it is warmer. In a couple days, I will go into the hive to ensure that the queen has been released and has started to lay eggs.

So happy to be home!

...brrrrrr, bees!

The bees are in, and it is freezing and rainy. Rachel and I have taken to google to figure out when we should install the bees. We will keep you all posted, but in the meantime, here are some pictures of the bee pick-up.

P.S. Get excited for the big reveal...the new Queens' names!

40,000 bees in the back seat with Kliness

Have you ever kept 20,000 bees in your kitchen?

Great photo of a bee cluster.  The bees are clustered around the queen's cage.  They do this to stay warm.

...here we go again!

You may have noticed that my posts dropped off last October. I am ready to tell the world the sad truth....I killed my bees. Unknowingly, of course, and indirectly, but nevertheless, dead.

I checked in on the hive the Saturday after Thanksgiving; they were alive. It was a beautifully warm day so we checked in on Rachel's too. They were also alive, and they were in a perfect bee cluster. Bees stay in a cluster in the winter that resembles a ball of bees. They do this to stay warm by sharing body heat.

Two weeks later, we had another warm day, and I decided to go knock on the hive to see if I heard buzzing bees inside. Tap tap. No buzz. Tap tap. No buzz. So I suited up and went in the hive....not a bee in sight. No dead bees and not a single live bee. They were gone. Flew the coop. So inadvertently, I must have done something to cause the bees to leave. Chances are they had varroa mites causing them to sense inevitable disaster and collapse of their colony. They had no choice but to leave and build a new home. It was so late in the fall that I doubt they were able to build a new hive with enough honey supplies to last through winter.

Two weeks later, Rachel's bees met the same fate. She went to look in on them. They were still in their bee cluster, but they were all dead. She shifted through the bees, and she wasn't able to find the queen.

Needless to say, we are starting over. We are going with two hives each this year to better our chances of survival. The bees will be delivered at the end of March. We needed new woodware in order to house 2 colonies of bees. Yesterday, we finished painting and priming all of our hives. Here are some photos. I look forward to sharing round 2 with you all.

R.I.P Priscilla and Gwenevere

...making honey

Although this post is super delayed from the actual date of extraction, here is the story about extracting honey.

A couple weeks before our actual extraction, we met with all of the mentor class to learn how to extract.  Our mentors made the process look extremely simple (we learned that this was solely due to experience...we have none).  While at the extraction class, the hive boxes were removed, tilted on their side, and blown with a leaf blower to remove the bees.  Simple right?  After the bees were removed, the box was placed under a blanket to keep the bees from returning to the frames.  The extractor was set up in a building where the frames were removed individually.  Once the frame is taken from the box, the caps are cut off and scraped with a hot knife and a cap scratcher to access the honey.  Four frames are placed in an extractor.  The extractor is a cylinder that has either a hand crank or an electric motor to spin it.  As the extractor spins, the honey is thrown out of the frames and is funneled to the bottom of the barrel and out a hole.  The honey then goes through a double strainer to remove debris (wax, bugs, dead bees) and into another bucket where it is ready to be put into jars.

This is how our extraction went...

Rachel and I are very lucky to have strong colonies.  We planned to take 16 frames off each hive.   As we approached the bee yard, Rachel's hive appeared to be missing.  As we drove closer, we realized her hive had been knocked over.  All the boxes had separated and were scattered about the yard.  There was obvious chaos as well inspected the hive.  The bees were fighting to the death to prevent honey robbing.  Because the hive was open, the honey became an easy target for the 30 hives in the bee yard.  Many of Rachel's bees were dead and some of her honey had been taken.

This shows the robbed honey from one of Rachel's frames.  The empty cells to the right of the frame have been robbed.  The cells on the left are full of honey and still capped.

After setting Rachel's hive back up, we removed 2 supers from her hive and 2 supers from my hive. As we walked over to the leaf blower, it began to rain and thunder.  We should have taken that as a sign, but we didn't.  Leaf blowing turned out to be an awful idea...the bees clung to the frames with all their might and if I was able to blow them out of the box, they quickly flew back in.  I was stung pretty immediately causing a much needed time-out.

Notice the epi-pen in front of me.  I'm allergic to everything...except bees! Better safe than sorry though.

After talking out our next move, we decided to ditch the leaf blower and do it the old-fashioned way; remove each frame, smoke it, and brush the bees off.  After 15 minutes, we had cleared all the bees from the 32 frames and were headed home.  The extracting went seamlessly, and we were soon left with about 7 gallons of honey.

Rachel diligently cleaned each piece of equipment.

Our extractor was bolted to a pallet to hold it in place.  The honey ended up in the white 5-gallon bucket.

Hot knife

After using the hot knife to remove the caps, you use a scratcher to remove any remaining low-lying caps.

This was the 2nd 5-gallon bucket.  It is about half-full.

...educating the masses

So much capped honey!

Today marked the monthly meeting at the bee yard.  Marcus' wife is expecting a baby any day so we had a substitute instructor...Ken.  It was interesting having someone else teaching today.  We got a different point-of-view.  He gave us a few tips and tricks that have helped him over the years.

My hive is doing incredible.  I have 2 full honey supers that will yield about 4 gallons of honey.  We will be learning to extract honey on August 18th.  Ken suggested that I add a 3rd honey super in order to ensure that my bees do not swarm.  Swarming occurs when colonies become too large and need to divide.  They will lay and raise a new queen.  The reigning queen will leave the hive with half the workers and a few drones.  They will fill the air around the hive often surrounding a branch until the new location is found.  Bees usually swarm in the spring.  Ken said if they swarmed in the late summer or fall, the existing colony would not survive the winter.  So I will add another honey super....this can only be a good thing: no swarms and more honey!

Hive beetle.  In the next couple weeks, we will be checking our hive beetle count.  If we have an excessive amount, we will treat the hives.

I also wanted to touch on the title of my post this week and expand on the title of my last post.  I mentioned the dying colony last post.  I took some photos this week of the dead colony.  The Tennessee Valley Beekeepers Association (TVBA) have examined the dead colony and had the Tennessee State Beekeeper involved in discovering what happened to the colony.  The TVBA and the State of Tennessee could find no disease that would have caused the decline and eventual death.  The colony was strong and very suddenly died.  It turns out that 2 other hives died as well.  They were not as strong, but being cared for by a master beekeeper with experience since young adulthood who makes his living on hiving bees.  It appears that the hives were sprayed with pesticide through the small entrance at the base of the hive.  The hives have not been tested for a particular pesticide, but TVBA has come to this conclusion due to the positioning of the bees at the time of death.  The bees were pushed toward the back, sides and top of the hive like they were trying to run from something.  The bees also spilled out of the front of the hive as if they were ready to attack, but died immediately outside the entrance.

These bees are the ones that tried to escape/attack through the hive entrance.  They died immediately after leaving the entrance and fell to the ground.  It is very difficult to tell, but there are thousands of dead bees laying just outside the entrance.

This is a photo of the bottom super from the dead colony.  You can see that there are no bees except for a few against the top of the box.

This is the dead colony.

It turns out there has been a bit of drama at the bee yard that the students were unaware of.  A large company has a building near the bee yard.  When I say near, I would say it is at least 10 football fields...not that close.  The company noticed the bees a couple months ago when 2 Top Bar hives were placed about 20 feet away from the student's hives toward the company's building and new TVBA signs were placed at the edge of the bee yard.  These hives were a little bit more noticeable due to their placement, and the company now knew who to contact.  Their first complaint was that the bees were pooping on their cars.  Ridiculous.  If the bees were flying over to their parking lot in swarms and pooping, I wouldn't be as concerned about the mess on my car, but much more terrified of the bee masses flying above my head.  So silly!  When TVBA ignored this first report, the company sent another complaint about the safety of the employees in regards to the proximity of the bee yard.  This is where education is so important.  Honey bees are not aggressive unless you are robbing their honey or hurting them.  They will fight back if squished or swatted.  They also will protect their homes and belongings.  As beekeepers, we wear protective gear and smoke the bees in order to protect us as we "break in" to the bee's home.  I will need to knock on wood after writing this, but I have not been stung, and Rachel was stung once, 30 minutes after we left the bee yard when she unknowingly laid her hand down on a bee who had flown into her car.  I know that I will be stung.  I am fearful of it only because I am afraid I will scream embarrassingly and throw the frame full of bees that I am holding.  Although this colony death is obviously man made,  no one at the bee yard or TVBA is pointing fingers at the company next door.  It could have been a group of kids or someone trying to make a point.  We will probably not figure out who or why they did this, but it proves that the majority of the population is unaware of the benefits and need for honey bees, as well as, the non-aggressive nature of the honey bee.

I will get off my soap box now, but I am more than willing to answer any questions that you all have about the hives, bees, etc.  I don't know everything, but I have some amazing connections.  The TVBA was put in to place to encourage education and beekeeping, and they will give us the answers to the questions if I can't.